• Office Phone:
  • (718) 631-3333
  • Office Hours:
  • Mon - Sat: 9:00 AM to 12:00 PM  - Sun: Closed

Environmental Protection Agency (EPA)

These certifications are vital for technicians working in all industries.

EPA Lead Inspector Initial (Part 2)

EPA Logo

The USEPA Lead Inspector Initial is a 3 day (24-hour) training course that will teach the Students how to conduct Lead-based Paint Inspections and Surveys through the discussion of work practices, testing operations, the use of XRF analyzers, sampling, reporting and much more. Hands-on workshops included with the course consist of Lead-based Paint Inspection Methods; Lead-based Paint Sampling; Clearance Testing; and How to Prepare a Lead Paint Inspection Report.

Following the successful completion of this course, you will receive an Interim Course Completion Certificate which will allow you to work for a 6-month period as a Lead Inspector while you are completing the USEPA Application Process to receive your full 3-year license.

Event Information

Event Date 01-15-2025 9:30 am
Event End Date 01-15-2025 5:30 pm
Cut Off Date 01-15-2025
Capacity 8
Individual Price Part Two
Location BVAC Rescue Response Training Center

Venue Information - BVAC Rescue Response Training Center

BVAC Rescue Response Training Center
214-29 42nd Ave
Bayside, NY 11361

Located on the Second Floor, No Elevator.

Located in the center of Bayside Queens

1 block east from Bell Blvd on 42nd Ave (Cross streets - Bell Blvd & 214 Place.

Near the LIRR (Bayside Station), Q13, Q31, N20 (Two blocks north of Northern BLVD).

 

Street Parking - Meter Parking on 42nd Ave

  1.  Meter Parking - 25 cents per 15 minutes - 2-hour limit. (Free Parking on Sundays)
  2.  Bayside Municipal Parking Field (41st Avenue & 214th Place, Bayside NY 11361)
  3.  Free Street Parking - One Block Past of Bell Blvd East & West.
  4.  No Parking In The Lot Next To Our Building, You Will Be Towed or Locked In.

We are no longer accepting registration for this event

Agendas

EPA Lead Inspector Initial (English) 3 day course

Day 1: Introduction to Lead and Regulatory Framework

8:30 AM - 9:00 AM:

  • Registration and Welcome
    • Course overview
    • Introduction of instructors and participants

9:00 AM - 10:30 AM:

  • Module 1: Introduction to Lead and Its Hazards
    • Health effects of lead exposure
    • Sources of lead contamination
    • At-risk populations

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 2: Regulatory Framework and Requirements
    • Overview of federal and state regulations (TSCA, RCRA, etc.)
    • EPA’s Lead-Based Paint Program
    • Roles and responsibilities of a lead inspector

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 3: Lead-Based Paint Inspection
    • Definitions and inspection process
    • Pre-inspection planning
    • Visual assessment techniques

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:30 PM:

  • Module 4: Testing Methods
    • XRF (X-Ray Fluorescence) Analyzers
    • Paint chip sampling
    • Understanding laboratory analysis
    • Hands-on equipment demonstration

4:30 PM - 5:00 PM:

  • Q&A Session
    • Recap of the day’s learning
    • Open discussion and questions

Day 2: Advanced Lead Inspection Techniques and Hands-on Practice

8:30 AM - 9:00 AM:

  • Review of Day 1 and Q&A

9:00 AM - 10:30 AM:

  • Module 5: Soil, Dust, and Water Sampling
    • Procedures for collecting samples
    • Standards and clearance levels
    • Interpreting sample results

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 6: Lead Hazard Risk Assessment
    • Difference between inspection and risk assessment
    • Conducting risk assessments
    • Writing risk assessment reports

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 7: Hands-on Practice – Part 1
    • Simulated lead inspection scenarios
    • Using XRF analyzers and collecting samples
    • Documentation and record-keeping

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:30 PM:

  • Module 8: Hands-on Practice – Part 2
    • Continuation of hands-on exercises
    • Group discussions on findings
    • Instructor feedback on performance

4:30 PM - 5:00 PM:

  • Q&A Session
    • Recap of the day’s learning
    • Open discussion and questions

Day 3: Reporting, Compliance, and Examination

8:30 AM - 9:00 AM:

  • Review of Day 2 and Q&A

9:00 AM - 10:30 AM:

  • Module 9: Reporting and Documentation
    • Preparing lead inspection reports
    • Record-keeping requirements
    • Compliance with EPA and state guidelines

10:30 AM - 10:45 AM:

  • Break

10:45 AM - 12:00 PM:

  • Module 10: Legal and Ethical Considerations
    • Legal responsibilities of lead inspectors
    • Ethical issues in lead inspection
    • Case studies and examples

12:00 PM - 1:00 PM:

  • Lunch Break

1:00 PM - 2:30 PM:

  • Module 11: Review Session
    • Review of key concepts and regulations
    • Preparation for the final exam
    • Mock exam questions and discussion

2:30 PM - 2:45 PM:

  • Break

2:45 PM - 4:00 PM:

  • Final Examination
    • Written test covering all course material

4:00 PM - 4:30 PM:

  • Grading and Feedback
    • Examination results and feedback
    • Certification information and next steps

4:30 PM - 5:00 PM:

  • Course Wrap-Up
    • Final Q&A
    • Course evaluation
    • Issuance of certificates

This agenda covers key topics for a lead inspector course, including regulatory knowledge, hands-on practice, and legal considerations. Adjustments can be made based on specific needs or regulatory requirements. Subject to change.

Resources

Quick Links

Contact Us

Headquarters:
214-29 42nd Avenue

Bayside, New York 11361

Mailing Address:
P.O. Box 610606

Bayside, New York 11361

Phone: + 1 (718) 631-3333
Contact Form

Image

Subscribe to our Mailing List

* indicates required